Chevrolet 2004 Tahoe Spezifikationen PDF herunterladen (Seite 464)

100

101

1. If your vehicle is equipped with a hoist lock (J),

open the spare tire lock cover on the bumper

and use the ignition key to remove the lock.

2. Assemble the wheel wrench (H) and the two jack

handle extensions (I) as shown.

3. Insert the hoist end

(open end) (F) of the

extension through

the hole (G) in the

rear bumper.

Be sure the hoist end of the extension connects to

the hoist shaft (E). The ribbed square end of the

extension is used to lower the spare tire.

4. Turn the wheel wrench (H) counterclockwise to

lower the spare tire to the ground. Continue to

turn the wheel wrench until the spare tire can be

pulled out from under the vehicle.

If the spare tire does not lower to the ground, the

secondary latch is engaged causing the tire

not to lower. See “Secondary Latch System” later

in this section.

5-86

1 2 ... 459 460 461 462 463 464 465 466 467 468 469 ... 547 548

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2004 Tahoe Spezifikationen Seite 464

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Chevrolet 2004 Tahoe