Chevrolet 2005 Blazer Spezifikationen PDF herunterladen (Seite 201)

Radio Reception

The range for most AM stations is greater than for FM,

especially at night. The longer range, however, can

cause stations to interfere with each other. AM can pick

up noise from things like storms and power lines. Try

reducing the treble to reduce this noise.

FM stereo will give you the best sound, but FM signals

will reach only about 10 to 40 miles (16 to 65 km).

Tall buildings or hills can interfere with FM signals,

causing the sound to come and go.

Care of Your Cassette Tape Player

A tape player that is not cleaned regularly can cause

reduced sound quality, ruined cassettes, or a damaged

mechanism. Cassette tapes should be stored in their

cases away from contaminants, direct sunlight, and

extreme heat. If they are not, they may not operate

properly or may cause failure of the tape player.

The tape player should be cleaned regularly after every

50 hours of use. The radio may display CLEAN to

indicate that the tape player has been used for 50 hours

without resetting the tape clean timer. If this message

appears on the display, the cassette tape player

needs to be cleaned. It will still play tapes, but it should

be cleaned as soon as possible to prevent damage

to the tapes and player. If there is a reduction in sound

quality, try a known good cassette to see if the tape

or the tape player is at fault. If this other cassette has no

improvement in sound quality, clean the tape player.

For best results, use a scrubbing action, non-abrasive

cleaning cassette with pads which scrub the tape

head as the hubs of the cleaner cassette turn. The

recommended cleaning cassette is available through

your dealer.

When cleaning the cassette tape player with the

recommended non-abrasive cleaning cassette, it is

possible that the cassette may eject, because the cut

tape detection feature on the radio may recognize it as a

broken tape, in error. To prevent the cleaning cassette

from being ejected, use the following steps:

1. Turn the ignition on.

2. Turn the radio off.

3. Press and hold the TAPE DISC button for ﬁve

seconds. READY will appear on the display and

the cassette symbol will ﬂash for ﬁve seconds.

4. Insert the scrubbing action cleaning cassette.

5. Eject the cleaning cassette after the manufacturer’s

recommended cleaning time.

When the cleaning cassette has been ejected, the

cut tape detection feature will be active again.

3-75

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 435 436

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2005 Blazer Spezifikationen Seite 201

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Chevrolet 2005 Blazer