Chevrolet 2008 Impala Spezifikationen PDF herunterladen (Seite 118)

4. Immediately, within one second, release the button

when the garage door moves. The indicator light

will blink rapidly until programming is complete.

5. Press and release the same button again.

The garage door should move, conﬁrming

that programming is successful and complete.

To program another Rolling Code device such as an

additional garage door opener, a security device,

or home automation device, repeat Steps 1-5, choosing

a different function button in Step 3 than what you

used for the garage door opener.

If these instructions do not work, you probably have

a Fixed Code garage door opener. Follow the

Programming instructions that follow for a Fixed Code

garage door opener.

Programming Universal Home

Remote — Fixed Code

If you have questions or need help programming the

Universal Home Remote System, call 1-866-572-2728.

Most garage door openers sold before 1996 are

Fixed Code units.

Programming a garage door opener involves

time-sensitive actions, so read the entire procedure

before you begin. If you do not follow these actions,

the device will time out and you will have to repeat

the procedure.

To program up to three devices:

1. To verify if you have a Fixed Code garage door

opener, remove the battery cover on your hand

held transmitter supplied by the manufacturer

of your garage door opener motor. If you see a row

of dip switches similar to the graphic above, you

have a Fixed Code garage door opener. If you

do not see a row of dip switches, return to

the previous section for Programming Universal

Home Remote – Rolling Code.

2-44

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 399 400

Keine Kommentare

Chevrolet 2008 Impala Spezifikationen Seite 118