20
To Disable the 12V Power
Important:
Cut through the red positive low voltage
cable on each side of the tag to remove a
section of the cable to ensure they cannot
inadvertently reconnect.
1. Press the Start button on the center
instrument panel to turn OFF the ignition.
2. Cut the12V positive battery cable at the
yellow tag cut position. The cable is
identified by the yellow First Responder
tag. The tag is located behind the left
rear closeout panel in the rear
compartment of the vehicle.
Note: After disabling 12V power, wait 1
minute to allow any un-deployed air bag
reserve energy to dissipate.
Kommentare zu diesen Handbüchern