Chevrolet 2006 Avalanche Spezifikationen PDF herunterladen (Seite 111)

100

101

If the Four-Wheel High, AUTO 4WD or Two-Wheel

High switch is pressed when your vehicle is in gear

and/or moving, the Four-Wheel High, AUTO 4WD

or Two-Wheel High indicator light will ﬂash for

30 seconds but will not complete the shift unless your

vehicle is moving less than 3 mph (5 km/h) and the

transmission is in NEUTRAL (N).

Shifting into NEUTRAL

To shift the transfer case to NEUTRAL do the following:

1. Make sure the vehicle is parked so that it will

not roll.

2. Set the parking brake. See Parking Brake on

page 2-38 for more information.

3. Start the vehicle or turn the ignition to RUN.

4. Put the transmission in NEUTRAL (N).

5. Shift the transfer case to Two-Wheel High.

6. Simultaneously press and hold the Two-Wheel High

and Four-Wheel Low buttons for 10 seconds. The

NEUTRAL light will come on when the transfer case

shift to NEUTRAL is complete.

7. If the engine is running, verify that the transmission

is in NEUTRAL (N) by shifting the transmission to

REVERSE (R) for one second, then shift the

transmission to DRIVE (D) for one second.

8. Turn the ignition to ACCESSORY, which will turn

the engine off.

9. Place the transmission shift lever in PARK (P).

10. Turn the ignition to LOCK.

Shifting Out of NEUTRAL

To shift out of NEUTRAL do the following:

1. Set the parking brake and apply the regular brake

pedal.

2. Shift the transmission to NEUTRAL (N) and turn the

ignition to RUN with the engine off.

3. Press the button for the desired transfer case shift

position (Two-Wheel High, Four-Wheel High, AUTO

4WD, or Four-Wheel Low).

After the transfer case has shifted out of NEUTRAL

the NEUTRAL light will go out.

2-37

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 521 522

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2006 Avalanche Spezifikationen Seite 111

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autositz Chevrolet 2006 Avalanche