Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 105)

Steering Column Shift Lever

1. Hold the brake pedal down with your right foot and

set the parking brake.

2. Move the shift lever into PARK (P) by pulling the

shift lever toward you and moving it up as far as it

will go.

3. Turn the ignition key to OFF.

4. Remove the key and take it with you. If you can

leave your vehicle with the ignition key in your

hand, your vehicle is in PARK (P).

Console Shift Lever

1. Hold the brake pedal down with your right foot and

set the parking brake.

2. Move the shift lever into PARK (P) by holding in the

button on the shift lever and pushing the lever all

the way toward the front of the vehicle.

3. Turn the ignition key to OFF.

4. Remove the key and take it with you. If you can

leave your vehicle with the ignition key in your

hand, your vehicle is in PARK (P).

Leaving Your Vehicle With the

Engine Running

{CAUTION:

It can be dangerous to leave your vehicle with

the engine running. Your vehicle could move

suddenly if the shift lever is not fully in

PARK (P) with the parking brake ﬁrmly set.

And, if you leave the vehicle with the engine

running, it could overheat and even catch ﬁre.

You or others could be injured. Do not leave

your vehicle with the engine running.

If you have to leave your vehicle with the engine running,

be sure your vehicle is in PARK (P) and your parking

brake is ﬁrmly set before you leave it. After you have

moved the shift lever into the PARK (P) position, hold the

regular brake pedal down. Then, see if you can move the

shift lever away from PARK (P) without ﬁrst pulling it

toward you or if you have the console shift lever, without

ﬁrst pushing the button. If you can, it means that the shift

lever was not fully locked into PARK (P).

2-29

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 389 390

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 105