Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 106)

Torque Lock

If you are parking on a hill and you do not shift your

transaxle into PARK (P) properly, the weight of the

vehicle may put too much force on the parking pawl in

the transaxle. You may ﬁnd it difficult to pull the shift

lever out of PARK (P). This is called “torque lock.”

To prevent torque lock, set the parking brake and then

shift into PARK (P) properly before you leave the

driver’s seat. To ﬁnd out how, see Shifting Into Park (P)

on page 2-28.

When you are ready to drive, move the shift lever out of

PARK (P) before you release the parking brake.

If torque lock does occur, you may need to have another

vehicle push yours a little uphill to take some of the

pressure from the parking pawl in the transaxle, so you

can pull the shift lever out of PARK (P).

Shifting Out of Park (P)

Your vehicle has an automatic transaxle shift lock

control system. You must fully apply your regular brakes

before you can shift from PARK (P) when the ignition

is in RUN. See Automatic Transaxle Operation on

page 2-24.

If you cannot shift out of PARK (P), ease pressure on

the shift lever by pushing it all the way into PARK (P)

while keeping the brake pedal pushed down. Release

the shift lever button if you have a console shift.

Then move the shift lever out of PARK (P), being sure

to press the shift lever button if you have a console shift.

If you ever hold the brake pedal down but still cannot

shift out of PARK (P), try this:

1. Turn the ignition key to ACCESSORY.

2. Apply and hold the brake pedal down until the end

of Step 4.

3. Shift to NEUTRAL (N).

4. Start the engine and shift to the drive gear you want.

5. Have the vehicle ﬁxed as soon as you can.

2-30

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 389 390

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 106