Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 115)

5. Press and hold the newly-trained Universal Home

Remote button and observe the indicator light.

If the indicator light stays on constantly,

programming is complete and your device should

activate when the Universal Home Remote button is

pressed and released.

To program the remaining two Universal Home

Remote buttons, begin with Step 2 under

“Programming Universal Home Remote.” Do not

repeat Step 1 as this will erase all of the

programmed channels.

If the indicator light blinks rapidly for two seconds

and then turns to a constant light, continue with

Steps 6 through 8 following to complete the

programming of a rolling-code equipped device,

most commonly, a garage door opener.

6. Locate in the garage, the garage door opener

receiver (motor-head unit). Locate the “Learn”

or “Smart” button. This can usually be found where

the hanging antenna wire is attached to the

motor-head unit.

7. Firmly press and release the “Learn” or “Smart”

button. The name and color of the button may

vary by manufacturer.

You will have 30 seconds to start Step 8.

8. Return to the vehicle. Firmly press and hold the

programmed Universal Home Remote button for

two seconds, then release. Repeat the

press/hold/release sequence a second time, and

depending on the brand of the garage door opener,

or other rolling code device, repeat this sequence

a third time to complete the programming.

The Universal Home Remote should now activate

your rolling-code equipped device.

To program the remaining two Universal Home Remote

buttons, begin with Step 2 of “Programming Universal

Home Remote.” You do not want to repeat Step 1,

as this will erase all previous programming from

the Universal Home Remote buttons.

2-39

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 389 390

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 115