Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 131)

100

101

Setting Cruise Control

Cruise control will not work if your parking brake is set,

or if the master cylinder brake ﬂuid level is low.

If you apply your brakes, the cruise control will shut off.

The CRUISE light on the instrument panel cluster

will come on after the cruise control has been set to the

desired speed.

{CAUTION:

If you leave your cruise control on when you

are not using cruise, you might hit a button

and go into cruise when you do not want to.

You could be startled and even lose control.

Keep the cruise control switch off until you

want to use cruise control.

1. Press the cruise control ON/OFF button.

2. Get up to the speed you want.

3. Press the SET- button located on the steering

wheel and release it.

4. Take your foot off the accelerator.

Resuming a Set Speed

Suppose you set your cruise control at a desired speed

and then you apply the brake. This shuts off the

cruise control. But you don’t need to reset it.

Once you are driving about 25 mph (40 km/h) or more,

press the +RES button on your steering wheel. The

vehicle will go back to your chosen speed and

stay there.

Increasing Speed While Using Cruise

Control

To increase the cruise speed while using cruise control:

• Press and hold the +RES button on the steering

wheel until you reach your new desired speed,

then release it.

• To increase vehicle speed in small increments,

press the +RES button.

3-11

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 389 390

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 131

Kommentare zu diesen Handbüchern