Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 290)

2. Get the vehicles close enough so the jumper cables

can reach, but be sure the vehicles are not touching

each other. If they are, it could cause a ground

connection you do not want. You would not be able

to start your vehicle, and the bad grounding

could damage the electrical systems.

To avoid the possibility of the vehicles rolling, set

the parking brake ﬁrmly on both vehicles involved in

the jump start procedure. Put an automatic

transaxle in PARK (P) or a manual transaxle in

NEUTRAL before setting the parking brake.

Notice: If you leave your radio or other accessories

on during the jump starting procedure, they could

be damaged. The repairs would not be covered

by your warranty. Always turn off your radio and

other accessories when jump starting your vehicle.

3. Turn off the ignition on both vehicles. Unplug

unnecessary accessories plugged into the cigarette

lighter or the accessory power outlets. Turn off

the radio and all lamps that are not needed. This

will avoid sparks and help save both batteries. And

it could save the radio!

4. Open the hoods and locate the batteries. Find the

positive (+) and negative (−) terminal locations on

each vehicle.

You will not need to access your battery for jump

starting. Your vehicle has a remote positive (+) jump

starting terminal for that purpose. The remote

positive (+) terminal is located in the engine

compartment on the passenger’s side of the vehicle,

on the underhood fuse block. See Engine

Compartment Overview on page 5-12 for more

information on location.

To uncover the remote

positive (+) terminal,

remove the fuse block

cover. You should always

use the remote positive (+)

terminal instead of the

positive (+) terminal on

the battery.

5-44

1 2 ... 285 286 287 288 289 290 291 292 293 294 295 ... 389 390

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 290