Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 75)

Restraint System Check

Checking the Restraint Systems

Now and then, make sure the safety belt reminder light

and all your belts, buckles, latch plates, retractors and

anchorages are working properly. Look for any other

loose or damaged safety belt system parts. If you see

anything that might keep a safety belt system from doing

its job, have it repaired.

Torn or frayed safety belts may not protect you in a

crash. They can rip apart under impact forces. If a belt

is torn or frayed, get a new one right away.

Also look for any opened or broken airbag covers, and

have them repaired or replaced. (The airbag system

does not need regular maintenance.)

Notice: If you damage the covering for the driver’s

or the right front passenger’s airbag, or the side

impact airbag covering (if equipped) on the ceiling

near the side windows, the airbag may not work

properly. You may have to replace the airbag

module in the steering wheel, both the airbag

module and the instrument panel for the right front

passenger’s airbag, or side impact airbag module

and ceiling covering for roof-mounted side impact

airbags (if equipped.) Do not open or break the

airbag coverings.

Replacing Restraint System Parts

After a Crash

{CAUTION:

A crash can damage the restraint systems in

your vehicle. A damaged restraint system may

not properly protect the person using it,

resulting in serious injury or even death in a

crash. To help make sure your restraint

systems are working properly after a crash,

have them inspected and any necessary

replacements made as soon as possible.

If you have had a crash, do you need new belts or

LATCH system parts?

After a very minor collision, nothing may be necessary.

But if the belts were stretched, as they would be if

worn during a more severe crash, then you need

new parts.

1-69

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 389 390

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 75