Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 99)

Engine Coolant Heater

Your vehicle may have this feature. In very cold

weather, 0°F (−18°C) or colder, the engine coolant

heater can help. You will get easier starting and better

fuel economy during engine warm-up. Usually, the

coolant heater should be plugged in a minimum of

four hours prior to starting your vehicle. At temperatures

above 32°F (0°C), use of the coolant heater is not

required.

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Open the hood and unwrap the electrical cord.

The cord is attached to the underside of the

diagonal brace, which is located above the engine

air cleaner/ﬁlter assembly.

3. Plug it into a normal, grounded 110-volt AC outlet.

{CAUTION:

Plugging the cord into an ungrounded outlet

could cause an electrical shock. Also, the

wrong kind of extension cord could overheat

and cause a ﬁre. You could be seriously

injured. Plug the cord into a properly grounded

three-prong 110-volt AC outlet. If the cord will

not reach, use a heavy-duty three-prong

extension cord rated for at least 15 amps.

4. Before starting the engine, be sure to unplug and

store the cord as it was before to keep it away

from moving engine parts. If you do not, it could be

damaged.

How long should you keep the coolant heater plugged

in? The answer depends on the outside temperature, the

kind of oil you have, and some other things. Instead of

trying to list everything here, we ask that you contact

your dealer in the area where you will be parking your

vehicle. The dealer can give you the best advice for

that particular area.

2-23

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 389 390

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 99