Chevrolet 2008 Uplander Spezifikationen PDF herunterladen (Seite 126)

If the engine still does not start, and the key appears to

be undamaged, try another ignition key. If the engine

still does not start with the other key, your vehicle needs

service. If your vehicle does start, the ﬁrst key may be

faulty. See your dealer/retailer or a locksmith who

can service the PASS-Key

III to have a new key made.

It is possible for the PASS-Key

III decoder to learn

the transponder value of a new or replacement key.

Up to 10 keys may be programmed for the vehicle.

This procedure is for learning additional keys only. If all

the currently programmed keys are lost or do not

operate, you must see your dealer/retailer or a locksmith

who can service PASS-Key

III to have keys made

and programmed to the system.

See your dealer/retailer or a locksmith who can service

PASS-Key

III to get a new key blank that is cut

exactly as the ignition key that operates the system.

To program the new key:

1. Verify the new key has PK3 stamped on it.

2. Insert the original, already programmed key into the

ignition lock cylinder and start the engine. If the

engine will not start, see your dealer/retailer

for service.

3. After the engine has started, turn the key to

LOCK/OFF and remove the key.

For vehicles ﬁrst sold in Canada, repeat step 2

with a different, already programmed, key before

proceeding to step 4.

4. Insert the key to be programmed and turn it to

ON/RUN within 10 seconds of removing the

previous key.

The security message will turn off once the key has

been programmed. It may not be apparent that

the security message went on due to how quickly

the key is programmed.

5. Repeat Steps 1 through 4 if additional keys are to

be programmed.

If you are ever driving and the security message comes

on and stays on, you will be able to restart your

engine if you turn it off. Your PASS-Key

III system,

however, is not working properly and must be serviced

by your dealer/retailer. Your vehicle is not protected

by the PASS-Key

III system at this time.

If you lose or damage a PASS-Key

III key, see your

dealer/retailer or a locksmith who can service

PASS-Key

III to have a new key made.

Do not leave the key or device that disarms or

deactivates the theft deterrent system in the vehicle.

2-30

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 475 476

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2008 Uplander Spezifikationen Seite 126

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autositz Chevrolet 2008 Uplander