Chevrolet 2008 Uplander Spezifikationen PDF herunterladen (Seite 130)

100

101

Engine Coolant Heater

The engine coolant heater, if available, can help in cold

weather conditions at or below 0°F (−18°C) for easier

starting and better fuel economy during engine warm-up.

Plug in the coolant heater at least four hours before

starting your vehicle. An internal thermostat in the

plug-end of the cord may exist which will prevent engine

coolant heater operation at temperatures.

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Open the hood and unwrap the electrical cord. The

electrical cord is located on the driver’s side of the

engine compartment.

3. Plug it into a normal, grounded 110-volt AC outlet.

{CAUTION:

Plugging the cord into an ungrounded outlet

could cause an electrical shock. Also, the

wrong kind of extension cord could overheat

and cause a ﬁre. You could be seriously

injured. Plug the cord into a properly grounded

three-prong 110-volt AC outlet. If the cord will

not reach, use a heavy-duty three-prong

extension cord rated for at least 15 amps.

4. Before starting the engine, be sure to unplug and

store the cord as it was before to keep it away

from moving engine parts. If you do not, it could be

damaged.

How long should you keep the coolant heater plugged

in? The answer depends on the outside temperature, the

kind of oil you have, and some other things. Instead

of trying to list everything here, we ask that you contact

your dealer/retailer in the area where you will be

parking your vehicle. The dealer/retailer can give you

the best advice for that particular area.

2-34

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 475 476

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2008 Uplander Spezifikationen Seite 130

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autositz Chevrolet 2008 Uplander