Chevrolet 2008 Uplander Spezifikationen PDF herunterladen (Seite 134)

100

101

Parking Brake

The parking brake is

located under the

instrument panel on the

driver’s side of the vehicle.

To set the parking brake, hold the regular brake pedal

down with your right foot and push down on the parking

brake pedal with your left foot.

If the ignition is on, the brake system warning light will

come on. See Brake System Warning Light on page 3-41.

To release the parking brake, hold the regular brake

pedal down with your right foot while you push down on

the parking brake pedal with your left foot. When you lift

your left foot from the parking brake pedal, it will pop up to

the released position.

Notice: Driving with the parking brake on can

overheat the brake system and cause premature wear

or damage to brake system parts. Make sure that the

parking brake is fully released and the brake warning

light is off before driving.

If you are towing a trailer and are parking on any hill,

see Towing a Trailer on page 4-28.

Shifting Into PARK (P)

{CAUTION:

It can be dangerous to get out of your vehicle

if the shift lever is not fully in PARK (P) with

the parking brake ﬁrmly set. Your vehicle can

roll. If you have left the engine running, the

vehicle can move suddenly. You or others

could be injured. To be sure your vehicle will

not move, even when you are on fairly level

ground, use the steps that follow. If you are

pulling a trailer, see Towing a Trailer on

page 4-28.

1. Hold the brake pedal down with your right foot and

set the parking brake. See Parking Brake on

page 2-38

2. Move the shift lever into PARK (P) by pulling the

shift lever toward you and moving it up as far as it

will go.

2-38

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 475 476

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2008 Uplander Spezifikationen Seite 134

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autositz Chevrolet 2008 Uplander