Chevrolet 2008 Uplander Spezifikationen PDF herunterladen (Seite 407)

100

101

To store the spare tire:

1. Lay the tire near the rear of the vehicle with the

valve stem down.

2. Remove the small center cap by tapping the back

of the cap with the extension of the shaft, if the

vehicle has aluminum wheels.

3. Slide the cable retainer through the center of the

wheel and start to raise the tire.

Make sure the retainer is fully seated across the

underside of the wheel.

4. When the tire is almost in the stored position, turn

the tire so the valve is towards the rear of the

vehicle.

This will help when you check and maintain tire

pressure in the spare.

5. Raise the tire fully against the underside of the

vehicle. Continue turning the folding wrench until

you feel more than two clicks. This indicates that the

compact spare tire is secure and the cable is

tight. The spare tire hoist cannot be overtightened.

6. Make sure the tire is stored securely. Push, pull (A),

and then try to turn (B) the tire. If the tire moves,

use the folding wrench to tighten the cable.

5-87

1 2 ... 402 403 404 405 406 407 408 409 410 411 412 ... 475 476

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2008 Uplander Spezifikationen Seite 407

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autositz Chevrolet 2008 Uplander