Chevrolet 2007 Avalanche Spezifikationen PDF herunterladen (Seite 119)

100

101

The vehicle may have signiﬁcant engagement noise and

bump when shifting between Four-Wheel Drive Low

and Four-Wheel Drive High ranges or from NEUTRAL

while the engine is running.

If the knob is turned to the Four-Wheel Drive High,

AUTO, or Two-Wheel Drive High switch position when

your vehicle is in gear and/or moving, the Four-Wheel

Drive High, AUTO or Two-Wheel Drive High indicator

light will ﬂash for 30 seconds but will not complete

the shift unless your vehicle is moving less than 3 mph

(5 km/h) and the transmission is in NEUTRAL (N).

Shifting into NEUTRAL

To shift the transfer case to NEUTRAL do the following:

1. Make sure the vehicle is parked so that it will

not roll.

2. Set the parking brake and apply the regular brake

pedal. See Parking Brake on page 2-45 for more

information.

3. Start the vehicle or turn the ignition to ON/RUN.

4. Put the transmission in NEUTRAL (N).

5. Shift the transfer case to Two-Wheel Drive High.

6. Turn the transfer case dial clockwise to NEUTRAL

till it stops and hold it for 10 seconds. Then slowly

release the dial to the four low position. The

NEUTRAL light will come on when the transfer case

shift to NEUTRAL is complete.

7. If the engine is running, verify that the transfer case

is in NEUTRAL (N) by shifting the transmission to

REVERSE (R) for one second, then shift the

transmission to DRIVE (D) for one second.

8. Turn the ignition to ACC/ACCESSORY, which will

turn the engine off.

9. Place the transmission shift lever in PARK (P).

10. Release the parking brake prior to moving

the vehicle.

11. Turn the ignition to LOCK/OFF.

2-43

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 513 514

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2007 Avalanche Spezifikationen Seite 119

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Videosysteme Chevrolet 2007 Avalanche