Chevrolet 2007 Avalanche Spezifikationen PDF herunterladen (Seite 142)

100

101

To program up to three devices:

1. From inside the vehicle, press the two outside

buttons at the same time for one to two seconds,

and immediately release them.

2. Locate in the garage, the garage door opener

receiver (motor-head unit). Locate the “Learn”

or “Smart” button. It can usually be found where the

hanging antenna wire is attached to the motor-head

unit and may be a colored button. Press this

button. After you press this button, you will have

30 seconds to complete the following steps.

3. Immediately return to your vehicle. Press and hold

the Universal Home Remote button that you would

like to use to control the garage door until the

garage door moves. The indicator light, above the

selected button, should slowly blink. You may

need to hold the button from ﬁve to 20 seconds.

4. Immediately, within one second, release the button

when the garage door moves. The indicator light

will blink rapidly until programming is complete.

5. Press and release the same button again. The

garage door should move, conﬁrming that

programming is successful and complete.

To program another Rolling Code device such as an

additional garage door opener, a security device,

or home automation device, repeat Steps 1 through 5,

choosing a different function button in Step 3 than

what you used for the garage door opener.

If these instructions do not work, you probably have a

Fixed Code garage door opener. Follow the

Programming instructions that follow for a Fixed Code

garage door opener.

2-66

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 513 514

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2007 Avalanche Spezifikationen Seite 142

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Videosysteme Chevrolet 2007 Avalanche