Chevrolet 2009 Silverado 1500 Pickup Spezifikationen Seite 169

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 598
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 168
Disconnecting the Rear Vision Camera
To disconnect the camera:
1. Remove the license plate.
2. Disconnect the camera connector from the chassis
harness, located behind the license plate, by
pressing on the release tab on the chassis harness.
A. Camera connector
cap tab
B. Chassis harness
C. Release tab
D. Camera connector
E. Retaining clip
F. Protective connector cap
G. Camera connector cap
3. Disconnect the protective connector cap from the
chassis harness by pressing on the release tab on
the chassis harness, then remove the cap.
4. Install the protective connector cap onto the chassis
harness where the camera connector was located.
A. Chassis harness
B. Release tab
C. Protective connector cap
D. Camera connector cap
5. Lift up on the camera connector cap tab and remove
the camera connector cap from the chassis harness,
then install the camera connector cap on the camera
connector.
6. Release the rear vision camera cable from the
retaining clip.
7. Loosen the camera harness grommet from the
pickup box and feed the harness through the
pickup box.
8. Remove the tailgate. See Tailgate on page 2-12 for
more information.
Reverse this procedure to reinstall the rear vision camera
and make sure the grommet and connection is secure.
2-69
Seitenansicht 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 597 598

Kommentare zu diesen Handbüchern

Keine Kommentare