Chevrolet 2009 Silverado 1500 Pickup Spezifikationen PDF herunterladen (Seite 176)

100

101

Programming Universal Home

Remote — Rolling Code

For questions or help programming the Universal Home

Remote System, call 1-866-572-2728 or go to

learcar2u.com.

Most garage door openers sold after 1996 are Rolling

Code units.

Programming a garage door opener involves

time-sensitive actions, so read the entire procedure

before starting. Otherwise, the device will time out and

the procedure will have to be repeated.

To program up to three devices:

1. From inside the vehicle, press the two outside

buttons at the same time for one to two seconds,

and immediately release them.

2. Locate in the garage, the garage door opener

receiver (motor-head unit). Locate the “Learn”

or “Smart” button. It can usually be found where the

hanging antenna wire is attached to the motor-head

unit and may be a colored button. Press this

button. After pressing this button, complete the

following steps in less than 30 seconds.

3. Immediately return to the vehicle. Press and hold

the Universal Home Remote button that will be

used to control the garage door until the garage

door moves. The indicator light, above the selected

button, should slowly blink. This button may

need to be held for up to 20 seconds.

2-76

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 597 598

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2009 Silverado 1500 Pickup Spezifikationen Seite 176

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Videosysteme Chevrolet 2009 Silverado 1500 Pickup