Chevrolet 2009 Silverado 1500 Pickup Spezifikationen PDF herunterladen (Seite 515)

100

101

Secondary Latch System

Your vehicle has an underbody-mounted tire hoist

assembly equipped with a secondary latch system. It is

designed to stop the spare tire from suddenly falling

off your vehicle. For the secondary latch to work,

the spare must be installed with the valve stem pointing

down. See Storing a Flat or Spare Tire and Tools on

page 5-108.

{ CAUTION:

Before beginning this procedure read all the

instructions. Failure to read and follow the

instructions could damage the hoist assembly and

you and others could get hurt. Read and follow the

instructions listed next.

To release the spare tire from the secondary latch:

1. Check under the

vehicle to see if the

cable end is visible.

If the cable is not

visible proceed

to Step 6.

2. If it is visible, ﬁrst try to tighten the cable by turning

the wheel wrench clockwise until you hear two clicks

or feel it skip twice. You cannot overtighten the cable.

3. Loosen the cable by turning the wrench

counterclockwise three or four turns.

4. Repeat this procedure at least two times. If the spare

tire lowers to the ground, continue with Step 5 of

Removing the Spare Tire and Tools on page 5-93.

5. If the spare does not lower, turn the wrench

counterclockwise until approximately 6 inches

(15 cm) of cable is exposed.

5-105

1 2 ... 510 511 512 513 514 515 516 517 518 519 520 ... 597 598

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2009 Silverado 1500 Pickup Spezifikationen Seite 515

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Videosysteme Chevrolet 2009 Silverado 1500 Pickup