Chevrolet 2009 Silverado 1500 Pickup Spezifikationen PDF herunterladen (Seite 73)

100

101

If the vehicle does not have a rear seat that will

accommodate a rear-facing child restraint, a rear-facing

child restraint should not be installed in the vehicle,

even if the airbag is off.

If your child restraint has the LATCH system, see Lower

Anchors and Tethers for Children (LATCH) on page 1-49

for how and where to install your child restraint using

LATCH. If you secure a child restraint using a safety belt

and it uses a top tether, see Lower Anchors and Tethers

for Children (LATCH) on page 1-49 for top tether anchor

locations.

Do not secure a child seat in a position without a top

tether anchor if a national or local law requires that

the top tether be anchored, or if the instructions

that come with the child restraint say that the top

strap must be anchored.

In Canada, the law requires that forward-facing child

restraints have a top tether, and that the tether be

attached.

You will be using the lap-shoulder belt to secure the

child restraint in this position. Follow the instructions

that came with the child restraint.

1. Move the seat as far back as it will go before

securing the forward-facing child restraint.

When the passenger sensing system has turned

off the right front passenger frontal airbag, the off

indicator in the passenger airbag status indicator

should light and stay lit when you start the vehicle.

See Passenger Airbag Status Indicator on

page 3-40.

2. Put the child restraint on the seat.

3. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or

around the restraint. The child restraint instructions

will show you how.

1-67

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 597 598

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2009 Silverado 1500 Pickup Spezifikationen Seite 73

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto-Videosysteme Chevrolet 2009 Silverado 1500 Pickup