Chevrolet 2014 Silverado 1500 Bedienungsanleitung Seite 19

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 18
19
HIll DesCent COntrOl
F
(Z71)
Hill Descent Control sets and maintains vehicle speed while descending a steep incline in
a forward or reverse gear.
Setting Hill Descent Control
1. When traveling at the desired speed (must be below 31 mph), press the
Hill
Descent Control button on the center console. The
Hill Descent Control symbol will
illuminate on the instrument cluster.
2. Increase or decrease speed by applying the accelerator or brake pedal. The adjusted
speed becomes the new set speed.
See Driving and Operating in your Owner Manual.
tIre Pressure mOnItOr
The
Low Tire Pressure warning light on the instrument cluster illuminates when one
or more of the vehicle’s tires is signicantly underinated. Fill the tires to the proper tire
pressures. The proper tire pressures for the vehicle are listed on the Tire and Loading
Information label, located below the driver’s door latch. Current tire pressures can be
viewed in the Driver Information Center.
Tire pressure is affected by cold weather and distance driven. If the low tire pressure
warning light illuminates when the vehicle is rst started in cooler temperatures and then
turns off as the vehicle is driven, check for the proper tire pressures.
Refer to your Owner Manual for additional information about normal monthly tire maintenance.
See Vehicle Care in your Owner Manual.
autOmatIC transmIssIOn
Range Selection Mode
Range Selection Mode allows the driver to select the range of gears desired for the current
driving conditions.
1. Move the shift lever to the Manual (M) position.
2. Press the + (plus) or – (minus) button on the shift lever to select a lower or higher
gear. An M and the current gear will be displayed on the Driver Information Center.
The transmission will be limited to the gear selected and lower gears. If vehicle speed is
too high or too low for the requested gear, the shift will not occur.
Tow/Haul Mode
The Tow/Haul Mode adjusts the transmission shifts to reduce shift cycling, such as when
towing or hauling heavy loads or driving on steep grades.
Press the
Tow/Haul Mode button on the end of the shift lever to turn the system
on or off.
See Driving and Operating in your Owner Manual.
Seitenansicht 18
1 2 ... 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare