Chevrolet 2005 Malibu Spezifikationen PDF herunterladen (Seite 88)

How the System Alarm is Activated

If the system is armed, it can be activated by either:

• Opening the driver’s door or liftgate (MAXX model).

This will cause a ten second pre-alarm chirp

followed by a thirty second full alarm of horn

and lights.

• Opening any other door. This will immediately

cause a full alarm of horn and lights for

thirty seconds.

When an alarm event has ﬁnished, the system will

re-arm itself automatically.

How to Turn Off the System Alarm

To turn off the system alarm, do one of the following:

• Press the lock button on the remote keyless

entry transmitter. The system will then re-arm itself.

• Press the unlock button on the remote keyless entry

transmitter. This will also disarm the system.

• Insert the key in the driver’s door key lock cylinder

and turn it counterclockwise. This will also disarm

the system.

• Insert the key in the ignition and turn it on. This will

also disarm the system.

Simulated Armed Mode

If you choose not to arm the system or if proper arming

can not be completed, the Content Theft Deterrent

system will ﬂash the security light once every

three seconds after a one minute delay with all the

doors closed. This ﬂashing serves as a visual deterrent;

however, the system is not armed.

How to Detect a Tamper Condition

If you hear three chirps when you press the unlock or

lock buttons on the remote keyless entry transmitter,

it means that the content theft security system

alarm was triggered previously.

Passive Arming

If passive arming is enabled through the DIC, the

system will arm itself 60 seconds after cycling the

ignition off and closing all doors.

2-18

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 409 410

Keine Kommentare

Chevrolet 2005 Malibu Spezifikationen Seite 88