Chevrolet Equinox 2006 Spezifikationen PDF herunterladen (Seite 326)

100

101

Hitches

It is important to have the correct hitch equipment.

Crosswinds, large trucks going by and rough

roads are a few reasons why you will need the

right hitch. Here are some rules to follow:

• If you will be pulling a trailer that, when

loaded, will weigh more than 2,000 lbs

(900 kg), be sure to use a properly mounted,

weight-carrying hitch and sway control of

the proper size. This equipment is very

important for proper vehicle loading and

good handling when you’re driving.

• Will you have to make any holes in the

body of your vehicle when you install a

trailer hitch?

If you do, remember to seal the holes when

you remove the hitch. If you do not seal

them, deadly carbon monoxide (CO) from

your exhaust can get into your vehicle.

See Engine Exhaust on page 127. Dirt and

water can, too.

Safety Chains

You should always attach chains between your

vehicle and your trailer. Cross the safety

chains under the tongue of the trailer to help

prevent the tongue from contacting the road if it

becomes separated from the hitch. Instructions

about safety chains may be provided by the hitch

manufacturer or by the trailer manufacturer.

Follow the manufacturer’s recommendation for

attaching safety chains and do not attach them to

the bumper. Always leave just enough slack so

you can turn with your rig. Never allow safety

chains to drag on the ground.

Trailer Brakes

If your trailer weighs more than 1,000 lbs (450 kg)

loaded, then it needs its own brakes — and they

must be adequate. Be sure to read and follow the

instructions for the trailer brakes so you will be able

to install, adjust and maintain them properly.

Because your vehicle may have anti-lock brakes, do

not try to tap into your vehicle’s brake system. If you

do, both brake systems will not work well, or at all.

326

1 2 ... 321 322 323 324 325 326 327 328 329 330 331 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet Equinox 2006 Spezifikationen Seite 326

Kommentare zu diesen Handbüchern