Rear
Lamps
r
1.
Open the
endgate.
2.
Remove the two
screws from the
lamp assembly.
3.
Pull the assembly
away from the
fender.
4.
Turn the socket
counterclockwise
to remove it.
Push
the tab in
while you turn
the socket
counterclock-
wise.
5.
Holding the base of the bulb, pull the bulb straight out
of
the socket.
6.
Push
the new bulb straight into the socket until it clicks.
7.
Put the socket into the lamp assembly and turn the socket clockwise
until it locks in place.
8.
Install the lamp assembly and screws.
9.
Close the endgate.
6-35
Kommentare zu diesen Handbüchern