Chevrolet 0819 Bedienungshandbuch Seite 14

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 13
14
Operating your Vehicle
Important tip
Make sure the vehicle has come to a completely stop
before switching between ” and “ ”.Forward Reverse
Stop
Vehicle will automatically stop after the accelerator is
released.
Safety devices
AUTO POWER OFF. If the motor is overloaded for
any reason, including improper usage, an electrical
circuit breaker will automatically cut off the power,
then resume after the parts have cooled!
Maintenance
Clean with a dry, soft cloth only. Do not wash
with water or corrosive agents.
Store vehicle in a dry area when not in use,
since moisture could cause the metal
components and electrical parts to corrode.
Operating your Vehicle
Operating your Vehicle
Removing the high speed lock-out screw will allow
the vehicle to be driven at the higher speed (5 mph,
(8 kmh) maximum) as well as the the lower speed
(2.5 mph, (4 kmh) maximum).
However, prior to removing the screw, be sure your
child can safely steer and operate the vehicle and
knows the rules for safe driving.
Cautious: High speed lock - out screw removing
must be done by an adult!
Advanced use - disconnecting
the high speed lock-out
Beginner use - low speed
Forward
Push the shifter in position and press the
accelerator slowly.
Forward
Push the shifter in position and press the
accelerator slowly.
Reverse
Vehicle has been pre-set to operate at low speed
(2.5 mph, (4 kmh) maximum). Once your child
has mastered safe driving skills and understands
the Safe Driving Rules, the high speed lock – out
screw can be removed to allow the vehicle to
operate at both high and low speeds.
Reverse
High Speed
The high speed lock-out must first be removed.
Afterwards push the shifter to High speed position and
press the accelerator slowly.
Remember to charge the battery monthly while
the vehicle is not in regular use.
Check and tighten all screws and coverings
regularly.
Check all plastic parts for cracks. Replace as
necessary.
Remove lock - out
screw for high speed
ReverseForward
High speed
Accelerator
Meijer.com
Seitenansicht 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare