Chevrolet 2008 Corvette Spezifikationen Seite 295

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 430
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 294
Changing Engine Oil and Filter
(Z06 Only)
Z06 models have a racetrack-ready dry sump engine
lubrication system. This high-performance system
operates differently than a standard engine lubrication
system and requires a special procedure when changing
the engine oil and filter. Follow this procedure closely
when changing the engine oil and filter.
A. Engine Oil Drain Plugs
B. Seals
1. Remove the two engine oil drain plugs from the
bottom of the engine oil pan. One drain plug
drains the external oil tank via the oil transfer supply
line. The other drain plug drains residual oil from
the crankcase sump. Allow the oil to drain.
2. Once the oil has been drained from the engine,
remove the engine oil filter and allow the oil to
drain.
3. Re-install both drain plugs and tighten them to
18 lb ft (25 Y).
4. Replace the oil filter and tighten it to 18 lb ft
(25 Y). See Maintenance Replacement Parts on
page 6-13 for the correct filter.
5. Oil is filled through the opening in the top of the
external engine oil tank. Remove the oil fill cap.
6. Add eight quarts (7.6 L) of oil to the oil tank. See
Capacities and Specifications on page 5-103.
7. Install the oil fill cap and insert the dipstick, if
removed.
8. Start the engine and let it run at idle for at least
15 seconds. This will circulate the fresh engine
oil through the lubrication system.
9. Shut off the engine and check the oil level as
described under “Checking Engine Oil (Z06 Only).”
5-21
Seitenansicht 294
1 2 ... 290 291 292 293 294 295 296 297 298 299 300 ... 429 430

Kommentare zu diesen Handbüchern

Keine Kommentare