Chevrolet 2004 Epica Spezifikationen PDF herunterladen (Seite 84)

Automatic Transaxle Operation

The automatic transaxle

has a shift lever located

on the console between

the seats.

There are seven different positions for the automatic

transaxle.

The instrument cluster has a shift lever position indicator

that shows which position the shift lever is in. This

indicator is located on the top right side of the instrument

cluster.

Movement between certain positions requires pushing

the shift lever toward the passenger side while shifting.

This prevents you from changing positions unexpectedly

by blocking the straight movement of the shift lever

while the vehicle is moving. It is also necessary to push

down on the shift lever to shift from NEUTRAL (N) to

REVERSE (R).

PARK (P): This position locks your front wheels.

It is the best position to use when you start your engine

because your vehicle cannot move easily.

{CAUTION:

It is dangerous to get out of your vehicle if the

shift lever is not fully in PARK (P) with the

parking brake ﬁrmly set. Your vehicle can roll.

Do not leave your vehicle when the engine is

running unless you have to. If you have left the

engine running, the vehicle can move suddenly.

You or others could be injured. To be sure your

vehicle will not move, even when you are on

fairly level ground, always set your parking

brake and move the shift lever to PARK (P).

See Shifting Into Park (P) on page 2-27.

Ensure the shift lever is fully in PARK (P) before starting

the engine. Your vehicle has an automatic transaxle

shift lock control system. You have to apply your regular

brake before you can shift from PARK (P) when the

ignition key is in ON. If you cannot shift out of PARK (P)

while holding the brake pedal down, see Shifting Out

of Park (P) on page 2-28.

2-22

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 337 338

Keine Kommentare

Chevrolet 2004 Epica Spezifikationen Seite 84