Chevrolet 2010 Equinox Bedienungsanleitung PDF herunterladen (Seite 334)

9-56 Vehicle Care

5. Remove the valve cap from the

valve cap stem. Activate the

TPMS sensor by increasing or

decreasing the tire's air pressure

for five seconds, or until a

horn chirp sounds. The horn

chirp, which may take up to

30 seconds to sound, confirms

that the sensor identification

code has been matched to this

tire and wheel position.

6. Proceed to the passenger side

front tire, and repeat the

procedure in Step 5.

7. Proceed to the passenger side

rear tire, and repeat the

procedure in Step 5.

8. Proceed to the driver side rear

tire, and repeat the procedure

in Step 5. The horn sounds

two times to indicate the sensor

identification code has been

matched to the driver side rear

tire, and the TPMS sensor

matching process is no longer

active. The Tire Learning Active

message on the DIC display

screen goes off.

9. Turn the ignition switch to

LOCK/OFF.

10. Set all four tires to the

recommended air pressure

level as indicated on the Tire

and Loading Information label.

11. Put the valve caps back on the

valve stems.

Tire Inspection

We recommend that you

regularly inspect your vehicle's

tires, including the spare tire,

if the vehicle has one, for signs

of wear or damage. See When It

Is Time for New Tires

on

page 9‑58

for more information.

Tire Rotation

Tires should be rotated every

8 000 to 13 000 km (5,000 to

8,000 miles). See Scheduled

Maintenance

on page 10‑2

.

The purpose of a regular tire

rotation is to achieve a uniform

wear for all tires on the vehicle.

This will ensure that the vehicle

continues to perform most like it

did when the tires were new.

1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 409 410

Kommentare zu diesen Handbüchern

Keine Kommentare