Chevrolet 2010 HHR Bedienungsanleitung PDF herunterladen (Seite 320)

100

101

To inspect or replace the ﬁlter, do the following:

1. Disconnect the Mass Air Flow sensor, PCV hose,

and both ducts.

2. Pull the entire system from the top of the engine.

3. Turn the system over and place it on a soft,

non-abrasive surface.

4. Remove the screws that hold the housing and

cover together and lift off the housing.

5. Inspect or replace the engine air cleaner/ﬁlter.

6. Reverse the steps to reinstall the system. Be sure

to reinstall the housing tightly.

How to Inspect the Engine Air

Cleaner/Filter (2.0L Engine Only)

See Engine Compartment Overview on page 6-16 for

the location of the engine air cleaner/ﬁlter.

To inspect the air cleaner/ﬁlter remove the ﬁlter from the

vehicle and lightly shake the ﬁlter to release loose

dust and dirt. If the ﬁlter remains caked with dirt, a new

ﬁlter is required. Never use compressed air to clean

the ﬁlter.

Because this operation can be a little difficult, you may

choose to have this done at the dealer/retailer service

department.

6-26

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 463 464

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2010 HHR Bedienungsanleitung Seite 320

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2010 HHR