Chevrolet 2011 Avalanche Bedienungsanleitung PDF herunterladen (Seite 445)

Black plate (89,1)

Chevrolet Avalanche Owner Manual - 2011

Vehicle Care 10-89

5. Check that the jumper cables do

not have loose or missing

insulation. If they do, you could

get a shock. The vehicles could

be damaged too.

Before you connect the cables,

here are some basic things you

should know. Positive (+) will go

to positive (+) or to a remote

positive (+) terminal if the vehicle

has one. Negative (−) will go to a

heavy, unpainted metal engine

part or to a remote negative (−)

terminal if the vehicle has one.

Do not connect positive (+) to

negative (−) or you will get a

short that would damage the

battery and maybe other parts

too. And do not connect the

negative (−) cable to the

negative (−) terminal on the dead

battery because this can cause

sparks.

6. Connect the red positive (+)

cable to the positive (+) terminal

of the vehicle with the dead

battery. Use a remote

positive (+) terminal if the vehicle

has one.

7. Do not let the other end touch

metal. Connect it to the

positive (+) terminal of the

good battery. Use a remote

positive (+) terminal if the vehicle

has one.

8. Now connect the black

negative (−) cable to the

negative (−) terminal of the good

battery. Use a remote

negative (−) terminal if the

vehicle has one.

Do not let the other end touch

anything until the next step. The

other end of the negative (−)

cable does not go to the dead

battery. It goes to a heavy,

unpainted metal engine part or

to the remote negative (−)

terminal on the vehicle with the

dead battery.

9. Connect the other end of the

negative (−) cable to the remote

negative (−) terminal, on the

vehicle with the dead battery.

10. Now start the vehicle with the

good battery and run the

engine for a while.

1 2 ... 440 441 442 443 444 445 446 447 448 449 450 ... 507 508

Kommentare zu diesen Handbüchern

Keine Kommentare