Chevrolet 2013 Camaro Bedienungsanleitung Seite 289

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 414
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 288
Black plate (39,1)
Chevrolet Camaro Owner Manual - 2013 - CRC - 4/18/12
Vehicle Care 10-39
1. Locate the bulb assembly under
the front fascia.
2. Disconnect the electrical
connector from the bulb
assembly and pull out the bulb
assembly.
3. Push in the new bulb assembly
to lock it into place.
4. Reconnect the electrical
connector to the bulb assembly.
The base model vehicle daytime
running lamps are the low beam on
the halogen headlamp. If one these
lamps fails, see Headlamps, Front
Turn Signal and Parking Lamps
(Uplevel Vehicle) on page 1037 or
Headlamps, Front Turn Signal and
Parking Lamps (Base Vehicle) on
page 1036 for replacement
information.
Fog Lamps
This vehicle may have fog lamps in
the front fascia.
To replace the fog lamp bulb in a
ZL1, see your dealer.
To replace one of these bulbs:
1. Locate the bulb assembly under
the front fascia.
2. Disconnect the electrical
connector from the bulb
assembly and pull out the bulb
assembly.
3. Push in the new bulb assembly
to lock it into place.
4. Reconnect the electrical
connector to the bulb assembly.
Taillamps, Turn Signal,
and Stoplamps
To replace a taillamp, turn signal,
or stoplamp bulb:
1. Open the trunk. See Trunk on
page 28.
2. Remove the close out panel
retainers to gain access to the
bulb socket connectors.
3. Turn the bulb socket
counterclockwise to remove it.
4. Pull the old bulb straight out of
the bulb socket.
5. Push the new bulb straight into
the bulb socket until it clicks.
6. Turn the bulb socket clockwise
to reinstall.
Seitenansicht 288
1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 413 414

Kommentare zu diesen Handbüchern

Keine Kommentare