Chevrolet 2007 Cobalt Spezifikationen PDF herunterladen (Seite 278)

100

101

To adjust the vertical aim on the headlamps:

1. Open the hood. See Hood Release on page 5-11

for more information.

2. Locate the aim dot on the lens of the low-beam

headlamp.

3. Record the distance from the ground to the aim

dot on the low-beam headlamp.

4. At a wall, measure from the ground upward (A) to

the recorded distance from Step 3 and mark it.

5. Draw or tape a horizontal line (B) on the wall the

width of the vehicle at the height of the mark in

Step 4.

Notice: Do not cover a headlamp to improve beam

cut-off when aiming. Covering a headlamp may

cause excessive heat build-up which may cause

damage to the headlamp.

6. Turn on the low-beam headlamps and place a

piece of cardboard or equivalent in front of the

headlamp not being adjusted. Do not place

it directly on the headlamp. This allows only the

beam of light from the headlamp being adjusted

to be seen on the ﬂat surface.

5-40

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 401 402

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2007 Cobalt Spezifikationen Seite 278

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Chevrolet 2007 Cobalt