Chevrolet 2007 TrailBlazer Spezifikationen PDF herunterladen (Seite 441)

3. Remove the insert from the blade assembly.

The insert has two notches at one end that are

locked by the bottom claws of the blade

assembly. At the notched end, pull the insert

from the blade assembly.

4. To install the new wiper insert, slide the

insert (D), notched end last, into the end

with two blade claws (A). Slide the insert all

the way through the blade claws at the

opposite end (B). The plastic caps (C) will be

forced off as the insert is fully inserted.

5. Be sure that the notches are locked by the

bottom claws. Make sure that all other claws are

properly locked on both sides of the insert slots.

A. Claw in Notch

B. Correct Installation

C. Incorrect Installation

6. Put the blade assembly pivot in the wiper arm

hook. Pull up until the pivot locking tab locks

in the hook slot.

7. Carefully lower the wiper arm and blade

assembly onto the windshield.

441

1 2 ... 436 437 438 439 440 441 442 443 444 445 446 ... 571 572

Kommentare zu diesen Handbüchern

Keine Kommentare