8.3 ENGINE SECTION CONNECTIONS
8.3.1 Route the wiper motor, coil, choke, temp sender, oil sender, starter, alternator
and a/c compressor wires across the firewall to the wiper motor and to the
engine.
NOTE: Included in the kit are 6 large harness securing clamps for the firewall and inner
fender routing and 2 small clamp for headlight crossover wires.
8.3.2 Cut wiper motor wires to length, terminate and connect wires as shown in Figure
8.12
11
Figure 8.11 Wiper Motor and Engine Wire Routing
Figure 8.12 Wiper Motor Connections
Kommentare zu diesen Handbüchern