Chevrolet 1996 Blazer Bedienungshandbuch Seite 285

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 392
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 284
7.
Put the socket into the lamp assembly and turn the
socket clockwise until it locks
in
place.
8.
Install the lamp assembly and screws.
9.
Close the endgate.
Underhood Lamp
1.
Disconnect
the
electrical connector from the
underhood lamp assembly.
2.
Remove the screws.
3.
Disconnect the ground wire.
4.
Remove the lamp assembly from the hood.
5.
Install the new bulb.
6.
Replace the assembly. Install and tighten the screws.
7.
Connect
the
ground wire.
8.
Connect the electrical connector to the lamp assembly.
Front Reading
Lamps
1.
Use a coin or small screwdriver to unscrew the
center of the overhead console lamp lens while
pressing in on the lamp assembly.
2.
Remove the lamp assembly from the console.
3.
Remove the bulb assembly from the lamp assembly.
4.
Pull the bulb straight out of
the
base.
5.
Put a new bulb into
the
bulb base.
6.
Install the bulb assembly into the lamp assembly.
7.
Place the lamp assembly into the console, turning
it
8.
Install the lens.
to latch it in place.
6-37
Seitenansicht 284
1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare