Chevrolet 1997 Cavalier Bedienungshandbuch Seite 281

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 388
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 280
Center High-Mounted Stoplamp
(Models Without a Spoiler)
To
change the bulb, do the following:
1.
Open the trunk and view the access hole under the
rear
shelf.
2.
Remove the bulb sockets by rotating and pull down.
3.
Remove the bulb and replace.
4.
Re-install the new bulb and socket into the
CHMSL.
Center High-Mounted Stoplamp
(Models With
a
Spoiler)
To
change the bulb, do the following:
1.
2.
3.
4.
Use
a
torx screwdriver to unscrew the bulb assembly
from
the
spoiler.
Gently pull out the bulb assembly.
Remove the bulb(s) by gently wiggling the bulb
from the assembly.
Replace the bulb(s) and reverse these steps to replace
the bulb assembly.
Interior
Lamps
Dome Lamp With Integral Reading Lamps
To
replace
a
bulb, do the following:
1.
Insert a flat screwdriver into the slot at
the
rear
of
the lens.
2.
With the screwdriver, push the tab rearward to
3.
Push the lens forward to release the two tabs
at
the
release the lamp lens.
front
of
the lens.
4.
Gently remove and replace the bulb(
s).
5.
Reverse these steps to replace the lens.
Dome Lamp Without Integral Reading Lamps
To
replace a bulb,
do
the following:
1.
From the rear of the dome lamp lens, insert a flat
screwdriver between the roof trim and the lens.
2.
With the screwdriver, push the tab at the rear
of
the
3.
Pull the lamp lens reward to release the
two
front tabs.
4.
Gently remove and replace the bulb(s).
5.
Reverse these steps to replace the lens.
lens forward to release the
lens.
6-39
Seitenansicht 280
1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 387 388

Kommentare zu diesen Handbüchern

Keine Kommentare