Chevrolet 1997 Monte Carlo Bedienungshandbuch Seite 107

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 376
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 106
Increasing Speed While Using Cruise Control
There are two ways to go to a higher speed:
1.
Use the accelerator pedal to get to the higher speed.
Push the
SET
button at the end of the lever, then
release the button and the accelerator pedal. You’ll
now cruise at the higher speed.
2.
Move the cruise switch from ON to WA. Hold it
there until you get up to the speed you want, then
release the switch.
(To
increase your speed in very
small amounts, move the switch to
WA.
Each time
you do this, your vehicle will go about
1
mph
(1.6
km/h)
faster).
The accelerate feature will only work after you set the
cruise control speed by pushing the
SET
button.
Reducing Speed While Using Cruise Control
There are two ways to reduce your speed while using
cruise control:
0
Push in the
SET
button until you reach the lower
speed you want, then release it.
0
To
slow down in very small amounts, push the
SET
button for less than half a second. Each time you do
this, you’ll
go
1
mph
(1.6
km/h)
slower.
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase your speed. When
you take your foot
off
the pedal, your vehicle will slow
down to the cruise control speed you set earlier.
Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may have to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake
or
shift to a lower gear
to keep your speed down. Of course, applying the brake
takes you out of cruise control. Many drivers find this to
be too much trouble and don’t use cruise control on
steep hills.
Ending Cruise Control
There are two ways to turn off the cruise control:
0
Step lightly on the brake pedal;
OR
0
Move the cruise switch to
OFF.
Erasing Cruise Speed Memory
When you turn off the cruise control or the ignition, or
shift into PARK (P) or NEUTRAL
(N),
your cruise
control set speed memory is erased.
2-33
Seitenansicht 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 375 376

Kommentare zu diesen Handbüchern

Keine Kommentare