Chevrolet 1999 Blazer Bedienungshandbuch PDF herunterladen (Seite 273)

100

101

yellowblue

5-21

Removing the Spare Tire and Tools

The jacking equipment you’ll need is stored along the

driver’s side inner rear quarter panel. In some cases, you

may have to remove the spare tire in order to reach the

jack. Your vehicle is also equipped with work gloves

and a plastic ground mat to assist in the changing of a

flat tire.

To remove your jack cover,

pull up on the latch(es) on

the cover. Remove the

wheel blocks, jack and

wheel wrench.

The following instructions explain how to remove

the spare tire, depending on where it is mounted on

your vehicle.

NOTICE:

Never remove or restow a tire from/to a stowage

position under the vehicle while the vehicle is

supported by a jack. Always tighten the tire fully

against the underside of the vehicle when restowing.

To remove the

underbody

-mounted spare,

insert the chisel end of the

wheel wrench, on an angle,

into the hole in the rear

bumper. Be sure the chisel

end of the wheel wrench

connects into the hoist shaft.

Turn the wheel wrench counterclockwise to lower the

spare tire. Keep turning the wheel wrench until the spare

tire can be pulled out from under the vehicle.

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 431 432

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 1999 Blazer Bedienungshandbuch Seite 273

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 1999 Blazer