Chevrolet 1999 S10 Pickup Bedienungshandbuch PDF herunterladen (Seite 87)

2-24

Electronic Transfer Case (If Equipped)

If your four-wheel-drive

vehicle has the electronic

transfer case, the transfer

case switches are located

to the right of the

steering wheel.

Use these switches to shift into and out of four

-wheel

drive. You can choose among three driving settings:

2HI: This setting is for driving in most street and

highway situations. Your front axle is not engaged in

two

-wheel drive. When this lamp is lit, it is about

one

-half as bright as the others.

4HI: This setting engages your front axle to help drive

your vehicle. Use 4HI when you need extra traction, such

as on snowy or icy roads, or in most off

-road situations.

4LO: This setting also engages your front axle to give

you extra traction. You may never need 4LO. It sends

the maximum power to all four wheels. You might

choose 4LO if you were driving off

-road in sand, mud

or deep snow and climbing or descending steep hills.

Indicator lights in the switches show you which setting

you are in. The indicator lights will come on briefly when

you turn on the ignition and one will stay on. If the lights

do not come on, you should take your vehicle in for

service. An indicator light will flash while shifting. It will

remain illuminated when the shift is completed.

Shifting from 2HI to 4HI

Press and release the 4HI switch. This can be done at

any speed, and the front axle will lock automatically.

Shifting from 4HI to 2HI

Press and release the 2HI switch. This can be done at

any speed, and the front axle will unlock automatically.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 380 381

Keine Kommentare

Chevrolet 1999 S10 Pickup Bedienungshandbuch Seite 87