Chevrolet 2000 tracker Bedienungshandbuch PDF herunterladen (Seite 77)

2-12

ON (C): This is the position that the switch returns to

after you start your engine and release the switch. The

switch stays in the ON position when the engine is

running. But even when the engine is not running, you

can use ON to operate your electrical power accessories

and to display some instrument panel cluster warning

and indicator lights.

START (D): This is the position that starts the engine.

When the engine starts, release the key. The ignition

switch will return to ON for normal driving.

When the engine is not running, ACC and ON allow you

to operate your electrical accessories, such as the radio.

A warning tone will sound if you open the driver’s door

when the ignition is in ACC or LOCK and the key is in

the ignition.

CAUTION:

On manual transmission vehicles, turning the key

to LOCK will lock the steering column and result

in a loss of ability to steer the vehicle. This could

cause a collision. If you need to turn the engine

off while the vehicle is moving, turn the key only

to ACC. Don’t push the key in while the vehicle

is moving.

NOTICE:

If your key seems stuck in LOCK and you can’t

turn it, be sure you are using the correct key;

if so, is it all the way in? If it is, then turn the

steering wheel left and right while you turn the

key hard. But turn the key only with your hand.

Using a tool to force it could break the key or the

ignition switch. If none of this works, then your

vehicle needs service.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 373 374

Keine Kommentare

Chevrolet 2000 tracker Bedienungshandbuch Seite 77