Chevrolet 2005 Astro Spezifikationen PDF herunterladen (Seite 62)

To assist you in locating the lower anchors for this

child restraint system, each seating position with the

LATCH system has a visible metal anchorage point in

the seat where the seatback meets the seat cushion.

{CAUTION:

If a LATCH-type child restraint is not attached

to its anchorage points, the restraint will not

be able to protect the child correctly. In a

crash, the child could be seriously injured or

killed. Make sure that a LATCH-type child

restraint is properly installed using the

anchorage points, or use the vehicle’s safety

belts to secure the restraint following the

instructions that came with that restraint, and

also the instructions in this manual.

Securing a Child Restraint Designed

for the LATCH System

1. Find the LATCH anchorages for the seating

position you want to use, where the bottom of

the seatback meets the back of the seat cushion.

See Lower Anchorages and Top Tethers for

Children (LATCH System) on page 1-54.

2. Put the child restraint on the seat.

3. Attach and tighten the LATCH attachments on

the child restraint to the LATCH anchorages in

the vehicle. The child restraint instructions will

show you how.

4. If the child restraint is forward-facing, attach and

tighten the top tether to the top tether anchorage.

The child restraint instructions will show you

how. Also see Top Strap on page 1-50.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the

top tether from the top tether anchorage and then

disconnect the LATCH attachments from the LATCH

anchorages.

1-56

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 375 376

Keine Kommentare

Chevrolet 2005 Astro Spezifikationen Seite 62