Chevrolet 2005 Aveo Spezifikationen PDF herunterladen (Seite 250)

How to Add Coolant to the Coolant

Surge Tank

Notice: This vehicle has a speciﬁc coolant ﬁll

procedure. Failure to follow this procedure could

cause your engine to overheat and be severely

damaged.

If you have not found a problem yet, check to see if

coolant is visible in the surge tank. If coolant is visible

but the coolant level is not between the Minimum and

Maximum marks, add a 50/50 mixture of clean, drinkable

water and DEX-COOL

coolant at the coolant surge tank,

but be sure the cooling system, including the coolant

surge tank pressure cap, is cool before you do it.

See Engine Coolant on page 5-22 for more information.

If no coolant is visible in the surge tank, add coolant

as follows:

{CAUTION:

Steam and scalding liquids from a hot cooling

system can blow out and burn you badly. They

are under pressure, and if you turn the coolant

surge tank pressure cap — even a little — they

can come out at high speed.

CAUTION: (Continued)

Never turn the cap when the cooling system,

including the coolant surge tank pressure cap,

is hot. Wait for the cooling system and coolant

surge tank pressure cap to cool if you ever

have to turn the pressure cap.

{CAUTION:

Adding only plain water to your cooling

system can be dangerous. Plain water, or

some other liquid such as alcohol, can boil

before the proper coolant mixture will. Your

vehicle’s coolant warning system is set for the

proper coolant mixture. With plain water or the

wrong mixture, your engine could get too hot

but you would not get the overheat warning.

Your engine could catch ﬁre and you or others

could be burned. Use a 50/50 mixture of clean,

drinkable water and a proper coolant.

5-28

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 383 384

Keine Kommentare

Chevrolet 2005 Aveo Spezifikationen Seite 250