Chevrolet 2006 impala Bedienungshandbuch PDF herunterladen (Seite 22)

IMPALA

| 32 |

DESCRIPTION OF SPECIAL EQUIPMENT - OPTIONAL

IMPALA 9C1 AND 9C3 POLICE PACKAGE - (CONTINUED)

6J7 EXTERIOR LAMP EMERGENCY

FLASHING SYSTEM, HEADLAMPS,

TAIL LAMPS AND BACK-UP LIGHTS

HEADLAMPS

This option provides a headlamp high beam flashing module, rear lamps

flashing and control wire for customer furnished ON - OFF switch, coiled

in the right front foot well. The control lead may be combined with the

interior wiring leads for option 6J3 when that option is ordered with

option 6J7.

The headlamp flashing module is located at the right side front face of the

upper radiator support. The headlamp flashing module is activated by

application of 12-Volts to a dark green/red wire coiled in the right front

footwell. When activated, the left and right high beams and the high beam

instrument cluster telltale will flash alternately at 2.4 flashes per second.

During daylight conditions, the Daytime Running Lights (DRL) are

automatically deactivated whenever the headlamp flasher module is

activated; during nighttime conditions, the low beams are automatically

ON while the high beams flash (unless option 9G8 is present). Activating

the high beam switch will override the flashing mode and the high

beams will operate continuously.

A 15-AMP fuse, protects the front flasher circuit and is located in

the engine wiring harness junction block at the right side of the

engine compartment.

TAIL LAMPS AND BACK-UP LAMPS

When the headlamp flashing module is activated the body control module

will cause the left and right stop lamps to flash alternately with the backup

lamps at a rate of 2.4 flashes per second. The center high-mounted

stoplamp does NOT flash and operates only with application of the service

brakes. During nighttime conditions, the rear tail lamps are automatically

ON (unless option 9G8 is present). When 6J6 rear window auxiliary

stop/turn signal lamps are ordered they will also flash with the stop lamps.

Activation of the headlamp and rear lamp flashing can be separated. Call

Kerr Industries at 905-725-6561 for instructions.

The headlamp control on the driver’s side of the instrument panel

operates the headlamps. If your Impala does not have Option 9G8,

Daytime Running and Automatic Headlamp Delete, the Daytime Running

Lamps and Auto Headlamps can be turned off for one ignition cycle by

rotating the control knob momentarily counter-clockwise. See also

Section 3 of your Impala Owner’s Manual.

EXTERIOR LAMP CONTROL

Notes: Wiring diagram are Shown in Police Package Owner’s Manual Supplement (Shipped in Glove Box).

9G8 - Delete daytime running lights and automatic headlights. This

option disables the daytime running lights and automatic headlamps

control feature. Exterior lighting is manually controlled only.

Note:

Option 9G8 not available in Canada

2010 Municipal Guide 8/18/09 11:34 AM Page 32

1 2 ... 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2006 impala Bedienungshandbuch Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2006 impala