Chevrolet 2010 Camaro Spezifikationen PDF herunterladen (Seite 49)

P/N: 4LGE020-010 v3.1, 2012-03-12

A. Locate the water pump and attach to the

water pump bracket as shown. See fig 5A.

B. Using the supplied ¼-20 x .50” screws,

secure the water pump mount to the water

pump bracket. See fig 5B.

C. Mount the water pump to the driver side

frame rail using one (1) of the OEM screws

that was originally used to mount the OEM

windshield washer bottle.

D. Trim the ¾” hose coming from the bottom

port of the reservoir (that is mounted on the

passenger side) to connect with the water

pump inlet. Secure with a supplied nylon

ratchet clamp. See fig 5C.

E. Trim the hose from the bottom port of the

water cooler to the water pump outlet and

then secure with a nylon ratchet clamp.

5. WATER PUMP INSTALLATION

Fig 5B

Fig 5C

Fig 5A

SECURE WITH

FACTORY

HARDWARE

TRIM HOSES TO

LENGTH

SECURE WITH

CLAMPS

NOTE: Ensure that there are no pinched sections in the

hose attached to the inlet of the pump. Pump inlet

restrictions may cause significant reduction in

pump flow.

PUMP INLET

PUMP OUTLET

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 100 101

Keine Kommentare

Chevrolet 2010 Camaro Spezifikationen Seite 49