Chevrolet 2010 Camaro Bedienungsanleitung Seite 271

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 372
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 270
3. Disconnect the wiring harness
and turn the bulb socket
counterclockwise to remove it
from the headlamp assembly.
4. Pull the bulb straight out from the
socket.
5. Push the new bulb into the
socket and reinstall the socket
into the headlamp assembly by
turning it clockwise.
6. Reconnect the electrical
connector.
7. Pull the duct back out of the
air cleaner/filter housing until
the tabs snap the duct back
into position.
Daytime Running
Lamps (DRL)
The up-level model vehicle may
have daytime running lamps which
would be located on the facia.
To replace one of these bulbs:
1. Locate the bulb assembly under
the front facia.
2. Disconnect the electrical
connector from the bulb
assembly and pull out the
bulb assembly.
3. Push in the new bulb assembly
to lock it into place.
4. Reconnect the electrical
connector to the bulb assembly.
The base model vehicle daytime
running lamps are the low beam
on the halogen headlamp. If one
these lamps fail, see Headlamps,
Front Turn Signal and Parking
Lamps (Base Vehicle) on page 9-37
or Headlamps, Front Turn Signal and
Parking Lamps (Up-Level Vehicle)
on page 9-38 for replacement
information.
Vehicle Care 9-39
Seitenansicht 270
1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 371 372

Kommentare zu diesen Handbüchern

Keine Kommentare