Chevrolet 2010 Suburban Bedienungsanleitung PDF herunterladen (Seite 463)

100

101

Black plate (29,1)

Chevrolet Tahoe/Suburban Owner Manual - 2010

Hot Check Procedure

Use this procedure to check the transmission fluid level

when the transmission fluid temperature is between

71°C and 93°C (160°F and 200°F).

The hot check is the most accurate method to check the

fluid level. The hot check should be performed at the

first opportunity in order to verify the cold check. The

fluid level rises as fluid temperature increases, so it is

important to ensure the transmission temperature is

within range.

1. Locate the

transmission dipstick at

the rear of the engine

compartment, on the

passenger side of the

vehicle.

See Engine Compartment Overview

on page 6‑16

for more information.

2. Flip the handle up, and then pull out the dipstick

and wipe it with a clean rag or paper towel.

3. Install the dipstick by pushing it back in all the way,

wait three seconds, and then pull it back out again.

4. Check both sides of the dipstick and read the lower

level. Repeat the check procedure to verify the

reading.

5. Safe operating level is within the HOT cross hatch

band on the dipstick. If the fluid level is not within

the HOT band, and the transmission temperature

is between 71°C and 93°C (160°F and 200°F), add

or drain fluid as necessary to bring the level into

the HOT band. If the fluid level is low, add only

enough fluid to bring the level into the HOT band.

It does not take much fluid, generally less than

0.5 Liter (1 Pint). Do not overfill.

6. If the fluid level is in the acceptable range, push

the dipstick back in all the way, then flip the handle

down to lock the dipstick in place.

6-29

1 2 ... 458 459 460 461 462 463 464 465 466 467 468 ... 613 614

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2010 Suburban Bedienungsanleitung Seite 463

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2010 Suburban