169. Cut the red wire with the “eyelet” connec-
169. Cut the red wire with the “eyelet” connec-
tor to 13” in length. Strip off ½” of the insulation
tor to 13” in length. Strip off ½” of the insulation
from the end and crimp on the supplied “eyelet”
from the end and crimp on the supplied “eyelet”
connector end.
170. Zip tie the relay box of the wiring harness
170. Zip tie the relay box of the wiring harness
to the existing OEM harness in front of the radia-
to the existing OEM harness in front of the radia-
tor overfl ow reservoir as shown.
tor overfl ow reservoir as shown.
171. Replace the positive (+) lug nut incorpo-
171. Replace the positive (+) lug nut incorpo-
rating the red wire “eyelet” you attached in step
rating the red wire “eyelet” you attached in step
#169 from the new harness.
#169 from the new harness.
172. Zip tie the fuse holder of the wire harness
172. Zip tie the fuse holder of the wire harness
to the existing wire harness by the headlight ad-
to the existing wire harness by the headlight ad-
justing screw as shown.
Kommentare zu diesen Handbüchern