Chevrolet 2011 Equinox Bedienungsanleitung PDF herunterladen (Seite 342)

Black plate (56,1)

Chevrolet Equinox Owner Manual - 2011

10-56 Vehicle Care

After the tires have been

rotated, adjust the front and rear

inflation pressures as shown on

the Tire and Loading Information

label. See Tire Pressure on

page 10‑49 and Vehicle Load

Limits on page 9‑21.

Reset the Tire Pressure Monitor

System. See Tire Pressure

Monitor Operation on

page 10‑52.

Make certain that all wheel nuts

are properly tightened. See

“Wheel Nut Torque” under

Capacities and Specifications on

page 12‑2.

{

WARNING

Rust or dirt on a wheel, or on the

parts to which it is fastened, can

make wheel nuts become loose

after time. The wheel could

come off and cause an accident.

(Continued)

WARNING (Continued)

When changing a wheel, remove

any rust or dirt from places where

the wheel attaches to the vehicle.

In an emergency, use a cloth or a

paper towel to do this; but be sure

to use a scraper or wire brush

later, if needed, to get all the rust

or dirt off. See If a Tire Goes Flat

on page 10‑62.

Lightly coat the center of the

wheel hub with wheel bearing

grease after a wheel change or

tire rotation to prevent corrosion

or rust build-up. Do not get

grease on the flat wheel

mounting surface or on the

wheel nuts or bolts.

When It Is Time for New

Tires

Factors such as maintenance,

temperatures, driving speeds,

vehicle loading, and road conditions

affect the wear rate of the tires.

Treadwear indicators are one way

to tell when it is time for new tires.

Treadwear indicators appear when

the tires have only 1.6 mm (1/16 in)

or less of tread remaining. See Tire

Inspection on page 10‑55 and Tire

Rotation on page 10‑55 for more

information.

1 2 ... 337 338 339 340 341 342 343 344 345 346 347 ... 415 416

Kommentare zu diesen Handbüchern

Keine Kommentare